S Series Horizontal Split case Centrifugal Pump
Summary
S Series Horizontal Split case Centrifugal Pump
CoMPared with other similar pumps, Model-S horizontal medium -open pump of NANFANG PUMP PUMP INDUSTRY is featured with long life, high efficiency, reasonable structure, low operating cost, convenient installation and repair, etc. It is an ideal pump for fire fighting, air - conditioning, chemical, water treatment and other industries.
Pump Body
The designed pressures of the pump are1.6MPaand2.0MPa. In order to meet different users'requirements around the world, the relevant inlet and outlet flanges of pump body can be chosen according to ANSI, PN and JIS standards. These inletand outlet flanges areall installed in the lower part of pump body, so the rotor can be taken out without disassembling pipelines of the system, and it is convenient to repair. Part of the pump body adopts a double-flow-passage structure in design, which can lower the radial force and extend the life of the mechanic seal and the bearing.
Blade Wheel
The hydraulic design of the blade wheel uses the up-to-date CFD technology, which can improve the hydraulic efficiency of the pump. The blade wheel has been made in a dynamic balance, so as to make sure that model-S pump can run very smoothly.
Shaft
The diameter of the shaft is big, while the gap between bearings is short. This can lower the deflection of the shaft, so as to extend the life of the mechanic seal and the bearing.
Shaft Casing
For model-S pumps of NANFANG PUMP, the shaft casing can be made of many different materials, so as to protect the shaft from corrosion and abrasion. The shaft casing can be replaced.
Abrasion Ring
A replaceable abrasion ring is installed between the pump body and blade wheel, so as to protect the pump body and blade wheel from abrasion. It is convenient to replace. This results in low maintenance cost, guarantees enough running gap and high efficiency.
Stuffing
The pump with unique stuffing design of NANFANG PUMP can use not only stuffing, but also mechanic seal. The seal device can be replaced without disassembling pump cover.
Bearing
The unique bearing design makes it possible that the bearing can use either grease or thin oil for lubrication. The designed life of the bearing can be up to more than 100,000 hours. A double-row thrust bearing or closed-type bearing can also be used.
Materials
According to actual demands of users, the materials of model-S horizontal medium-open pump can be copper, cast iron, nodular cast iron, 316 stainless steel, 416 stainless steel, duplex steel, Hastelloy, monelmetal, Titanium alloy, 20# alloy, etc.
Installment Mode
Model-S pump can be installed in two ways: horizontal and vertical installments. The vertical installment can save floor space.
Performance Chart of Model-S Single-stage-Double-suction Pump
Pump Model | Q Capacity (m3/h) | H Head m | n Speed (r/min) | (KW) Power | η Efficiency | (NPSH)r (m) | D Impeller diameter (mm) | Weight pump/base (kg) | ||
Shaft | electromotor | |||||||||
150S78 | 126 160 198 | 84 78 70 | 2950 | 45.3 | 55 | 75 | 3.5 | 245 | 158/112 | |
150S78A | 112 144 180 | 67 62 55 | 33.8 | 45 | 72 | 223 | 158/95 | |||
150S50 | 130 160 220 | 52 50 40 | 27.3 | 37 | 80 | 3.9 | 206 | 147/112 | ||
150S50A | 116 144 180 | 44 40 35 | 21 | 30 | 75 | 185 | 147/95 | |||
150S50B | 103 133 160 | 38 36 32 | 18.6 | 22 | 70 | 147/80 | ||||
200S95 | 183 280 324 | 103 95 85 | 91.7 | 125 | 79.2 | 5.3 | 282 | 240/- | ||
200S95A | 198 270 310 | 94 87 80 | 85.3 | 110 | 75 | 270 | ||||
200S95B | 245 | 72 | 64.9 | 75 | 74 | 250 | ||||
200S63 | 216 280 351 | 69 63 50 | 58.3 | 82.7 | 5.4 | 235 | 187/135 | |||
200S63A | 180 270 324 | 54.5 46 37.5 | 45.1 | 55 | 75 | 210 | 187/124 | |||
200S42 | 216 280 342 | 48 42 35 | 38.1 | 45 | 842 | 204 | 219/180 | |||
200S42A | 198 270 310 | 43 36 31 | 33.1 | 37 | 80 | 193 | ||||
250S65 | 360 485 612 | 71 65 56 | 1450 | 109 | 132 | 78.6 | 3 | 450 | 518/- | |
250S65A | 338 468 540 | 60 54 50 | 89.4 | 110 | 77 | 400 | ||||
250S39 | 360 485 612 | 42.5 39 32.9 | 61.5 | 75 | 83.6 | 32 | 367 | 400/240 | ||
250S39A | 324 468 576 | 35.5 30.5 25 | 49.3 | 55 | 79 | 328 | 400/233 | |||
250S24 | 360 485 576 | 27 24 19 | 36.9 | 45 | 85.8 | 3.5 | 285 | |||
250S24A | 342 414 482 | 22.2 20.3 17.4 | 27.6 | 37 | 83 | 265 | 370/201 | |||
250S14 | 360 485 576 | 17.5 14 11 | 21.5 | 30 | 85.8 | 3.8 | 245 | 305/225 | ||
250S14A+ | 320 432 504 | 13.7 11 8.6 | 15.8 | 18.5 | 82 | 214 | 305/215 | |||
300S90 | 590 790 936 | 93 90 82 | 243 | 300 | 79.6 | 4 | 530 | 840/- | ||
300S90A | 576 756 918 | 86 78 70 | 217 | 260 | 74 | 500 | ||||
300S90B | 540 720 900 | 72 67 57 | 180 | 220 | 73 | 470 | ||||
300S58 | 576 790 972 | 65 58 50 | 148 | 180 | 84.2 | 4.4 | 445 | 599/- | ||
300S58A | 529 720 893 | 55 49 42 | 119 | 160 | 81 | 419 | ||||
300S58B | 504 684 835 | 47.2 43 37 | 100 | 132 | 80 | 394 | ||||
300S32 | 612 790 900 | 36 32 28 | 79.2 | 90 | 86.8 | 4.6 | 348 | 709/- | ||
300S32A | 551 720 810 | 31 26 24 | 60.7 | 75 | 84 | 318 | ||||
300S19 | 612 790 935 | 22 19 14 | 47 | 55 | 86.8 | 5.2 | 290 | 434/485 | ||
300S19A | 504 720 829 | 20 16 13 | 39.2 | 45 | 80 | 260 | 434/490 | |||
300S12 | 612 790 900 | 14.5 12 10 | 30.4 | 37 | 84.8 | 5.5 | 251 | 413/243 | ||
300S12A | 522 684 792 | 11.8108.7 | 23.9 | 30 | 78 | 200 | 413/237 | |||
350S75 | 972 1260 1440 | 80 75 65 | 303 | 356 | 85.2 | 5.8 | 503 | 1200/- | ||
350S75A | 900 1170 1332 | 70 65 56 | 247 | 280 | 84 | 470 | ||||
Pump Model | Q Capacity (m3/h) | H Head m | n Speed (r/min) | (KW) Power | η Efficiency | (NPSH)r (m) | D Impeller diameter (mm) | Weight pump/base (kg) | ||
Shaft | electromotor | |||||||||
350S75B | 900 1080 1224 | 59 55 47.5 | 1450 | 197 | 220 | 82 | 5.8 | 443 | 1200/- | |
350S44 | 828 1260 1476 | 50 44 37 | 173 | 220 | 87.5 | 6.3 | 406 | 11051/- | ||
350S44A | 972 1116 1332 | 41 36 30 | 131 | 160 | 84 | 370 | ||||
350S26 | 864 1260 1440 | 32 26 22 | 102 | 132 | 87.5 | 6.7 | 340 | 672/- | ||
350S26A | 972 1116 1296 | 26 21.5 16.5 | 78.8 | 90 | 83 | 310 | ||||
350S16 | 864 1260 1440 | 20 16 13.4 | 64.5 | 75 | 85.3 | 7.1 | 290 | 632/- | ||
350S16A | 972 1044 1260 | 16 13.4 10 | 48.8 | 55 | 78 | 250 | ||||
500S98 | 864 2020 2340 | 14 98 79 | 970 | 678 | 800 | 79.5 | 6 | 860 | 4300/- | |
500S98A | 1620 1872 2170 | 96 83 67 | 540 | 630 | 78.5 | 800 | ||||
500S98B | 1500 1746 2020 | 86 74 59 | 452 | 560 | 78 | 745 | ||||
500S59 | 1400 2020 2340 | 68 59 47 | 391 | 450 | 83 | 675 | 2700/- | |||
500S59A | 1620 1872 2170 | 57 49 39 | 333 | 400 | 75 | 630 | ||||
500S59B | 1500 1746 2020 | 46 40 32 | 257 | 315 | 74 | 585 | ||||
500S35 | 1400 2020 2340 | 40 35 28 | 219 | 280 | 88 | 530 | 2300/- | |||
500S35A | 1620 1746 2020 | 31 27 21 | 151 | 220 | 85 | 498 | ||||
500S22 | 1400 2020 2340 | 24.5 22 19.4 | 144 | 182 | 84 | 460 | 2000/- | |||
500S22A | 1620 1746 2020 | 20 17 14 | 104 | 132 | 80 | 410 | ||||
500S13 | 1400 2020 2340 | 15 13 10.4 | 862 | 110 | 83 | 390 | ||||
600S75 | 1620 3170 | 75 | 727 | 800 | 89 | 7.5 | 782 | 4300/- | ||
600S75A | 2880 | 65 | 580 | 630 | 88 | 716 | ||||
600S47 | 3170 3500 | 56 47 38 | 465 | 560 | 88 | 626 | 3800/- | |||
600S32 | 2500 3170 3960 | 37 32 20 | 314 | 380 | 88 | 540 | 2500/- | |||
600S32A | 2520 2880 3600 | 31.5 27 20 | 246 | 280 | 86 | 500 | ||||
600S32B | 2304 2628 | 22 | 187 | 240 | 84 | 480 | ||||
600S22 | 3170 | 22 | 216 | 250 | 88 | 7 | 485 | |||
600S22A | 2880 | 18 | 161 | 215 | 87 | 440 | ||||
800S75 | 4320 6330 7200 | 84.5 75 67 | 730 | 1405 | 1600 | 92 | 8 | 990 | 8300/- | |
800S48 | 3600 5070 6200 | 55 48.5 43 | 585 | 752 | 1000 | 89 | 5.2 | 990 | 8300/- | |
800S29 | 4300 5400 5760 | 32 29 27 | 730 | 472 | 570 | 90 | 8 | 716 | 6000/- | |
800S29A | 3960 5000 5400 | 29 26 23.7 | 730 | 393.5 | 440 | 90 | 7 | 680 | 6000/- | |
800S29B | 3600 4700 5000 | 23.7 20 17.5 | 730 | 284.5 | 320 | 90 | 6.2 | 625 | 6000/- | |
800S29C | 3600 4300 4680 | 22.3 18.6 17 | 585 | 242 | 280 | 90 | 5 | 716 | 6000/- | |
800S29D | 3240 4000 4300 | 18.7 16.5 15 | 585 | 200 | 230 | 90 | 4.5 | 680 | 6000/- | |
800S29E | 2880 3800 3960 | 15.6 13 11.5 | 585 | 151.2 | 185 | 89 | 4 | 625 | 6000/- | |
Shinjo Company is a high tech enterprise specialized in producing various industrial valves. Shinjo strive on providing full package of industrial valve solution to client, focus on industrial valve manufacture, development, sales and services.
WeChat
WhatsApp
