Quality That Lasts.

Pneumatic Actuated PTFE Wafer Butterfly Valve, Size DN50mm-DN800mm
Contact:Sales Department
Tel:+86-21 5620 6641
Mobile:+86-13127946805
Email:info@shinjovalve.com
Tags:

Pneumatic Actuated PTFE Wafer Butterfly Valve, Size DN50mm-DN800mm

Pneumatic ptfe sitting down butterfly control valve is a type of middle-line type butterfly valve with higher corrosion resistance and good sealing. This ptfe seat butterfly valve is wafer structure and it is sealing materials are PTFE. Pneumatic PTFE sitting down butterfly valve is appropriate for working conditions with temperature ≤150 °C, weak corrosiveness or cleanliness needed. It controls the flow rate and intercepting medium within the water supply and drainage and gas pipelines from the food, medicine, chemical, oil, electrical power and paper industries.

Technical Parameters of Pneumatic PTFE Seated Wafer Butterfly Control Valve:
Nominal diameter: DN50~DN800;
Nominal pressure: PN10, PN16, PN25;
Connection method: wafer type;
Action range: 0~90°;
Sealing form: PTFE seal;
Working temperature: -20 ° C ~ +150 ° C;
Operation type: air source drive(can be equipped with handwheel;
Air supply pressure: 4~8bar (double acting),5~8bar (single acting);
Mode of action: single-acting actuator, double-acting actuator;

 The Structure of Pneumatic Actuated PTFE Wafer Butterfly Valve

No.

Parts Name

Material

1

Valve Seat

PTFE

2

Round Pin

1045 steel,stainless steel

3

Disc

ductile iron,carbon steel,stainless steel

4

Body

grey cast iron,carbon steel,stainless steel

5

Bolt

1035 steel,carbon steel,stainless steel

6

Stem

1045 steel,stainless steel

7

key

1045 steel,stainless steel

8

Bushing

copper-based powder metallurgy

9

Packing

o-ring,flexible graphite

10

Actuator

pneumatic piston type

11

Position Indicator

plastic

Accessories for PTFE Seated Butterfly Control Valve When Ordering:

Solenoid valve: 5/2-way solenoid valve,3/2-way solenoid valve;
Air filter pressure reducing valve: Regulate and filter the air supply;
Limit switch: Remote feedback switch signal;
Handwheel: Manual opening and closing valve;
Positioner: Input analog signal (4-20mA or 0-10V) to adjust valve opening;
Remarks:Solenoid valves and limit switches are divided into explosion-proof and non-explosion-proof.And Explosion-proof grades are required for explosion protection.

 The Dimensions of Pneumatic Actuated PTFE Wafer Butterfly Valve, Size DN50mm-DN800mm:

 The Dimensions of Pneumatic Actuated PTFE Wafer Butterfly Valve

DN

L

L1

L2

~H

H1

D

D1

n-Φd

50

42

141/159

71/83

269/281

68

52.9

120

4-23

65

44.7

159/211

83/95

283/303

75

64.5

136.2

4-26.5

80

45.2

159/248

83/107

289/309

93

78.8

160

8-18

100

52.1

211/269

95/123

320/338

104

10.4

185

4-24.5

125

54.4

248/269

107/123

351/366

118

123.3

215

4-23

150

55.8

269/345

123/152

380/405

133

155.6

238

4-25

200

60.6

345/409

152/172

435/477

165

202.5

295

4-25

250

65.6

409/438

172/187

509/552

197

250.5

357

4-29

300

76.5

438/550

187/215

597/622

224

301.6

407

4-29

350

76.5

550/600

215/240

653/688

267

333.3

467

4-30

400

86.5

550/633

215/262

720/787

309

389.6

515

4-30

450

105.6

600/633

240/262

772/858

328

440.51

565

4-30

500

131.8

633/730

262/330

867/1104

361

491.5

620

4-33

600

152

730/1700

330/

998/1220

459

592.5

725

4-36

700

163

1320/197

/

1116/1282

520

695

840

4-36

800

188

1430/2700

/

1330/1007

591

794.7

950

4-39

 The Features of PPneumatic Actuated PTFE Wafer Butterfly Valve:

1. Small and light, easy to disassemble and repair, and can be installed at any position;
2. The structure is simple and compact, and the 90 °C rotary opening and closing is rapid;
3. The operating torque is small, labor-saving and light;
4. The butterfly disc adopts a frame structure and it has high strength, large flow area and small flow resistance;
5. The sealing PTFE material is resistant to aging, corrosion and has long service life;
6. The seal parts can be replaced, the sealing performance is reliable, and the two-way seal has zero leakage.

 


About Us

Shinjo Company is a high tech enterprise specialized in producing various industrial valves. Shinjo strive on providing full package of industrial valve solution to client, focus on industrial valve manufacture, development, sales and services.

Contact Us
Tel: +86-21 5620 6641
Fax: +86-21 6915 6667
Mobile: +86-13127946805(WhatsApp)
Skype: maxchi2013
Fllow Us
WeChat
WhatsApp
Copyright © 2019 Shinjo Valve Co., Ltd.  Powerby:Injnet