Quality That Lasts.

High Pressure Electric Actuated Ball Valve
Nominal diameter: DN6-50mm;
Nominal pressure: 16.0MPa~50.0MPa;
Body material: 316L, 316, 304, etc.;
Sealing material: PTFE, high pressure nylon;
Control mode: switch type, intelligent adjustment type;

The high pressure electric actuated ball valve is composed of a welding forged steel high pressure ball valve and an electric actuator. The general pressure of high pressure electric ball valve is 16MPa~50MPa, which can be used for on/off control of high-pressure water, pressurized natural gas, hydraulic oil and other medium.

The electric high pressure ball valve is especially suitable for hydraulic station,gas station, heat transfer oil, liquefied gas, oil pipe and on/off regulation of the medium on high pressure occasions. High pressure electric ball valves are both pressure-resistant and resistant to high temperatures and abrasions,making them one of the most popular ball valves in modern industrial pipes.

Technical Parameters of High Pressure Electric Actuated Ball Valve:

Nominal diameter: DN6-50mm;
Nominal pressure: 16.0MPa~50.0MPa;
Applicable temperature: -29 ° C ~ +180 ° C;
Connection method: thread, clamp, butt welding, socket welding;
Body material: 316L, 316, 304, etc.;
Sealing material: PTFE, high pressure nylon;
Control mode: switch type, intelligent adjustment type;
Power supply voltage: 220V AC single phase, 110V AC single phase, 380/440V AC three phase, 24V/110V/220V AC;
Output torque: 50N·M～2000N·M;
Action time: 15 seconds / 30 seconds / 60 seconds, etc.;
Protection device: overheat protection,overload protection;
Ambient temperature: -30 ℃ ~ 60 ℃;
Protection level: IP65, IP55, IP65, IP67, etc.;

The Dimensions of High Pressure Electric Actuated Ball Valve:

The Features of Electric High Pressure Ball Valve: 

1. The valve opening position is clear at a glance, and the manual device can prevent power failure;
2. The electric actuator adopts imported original parts, which is precise and wear-resistant, with minimal backlash and safety guarantee;
3. The electric actuator shell is made of aluminum alloy by precision die-casting, which is exquisite,compact and wear resistant.With overheat protection system,so ti can prevent motor burnout;
4. Valve body advantage: the valve body is forged by high pressure to ensure that the ball valve can effectively resist pressure when the pressure on the pipe is unbalanced during use, and can be used safely;
5. Sealing advantage: the inner sealing ring is made of nylon seal or PTFE seal, which has the characteristics of high temperature resistance.It can enhanced sealing performance of high pressure electric ball valve;
6. The electric high pressure ball valve is small in size, light in weight, large in thrust, strong in function, and has a servo amplifier built-in, convenient operation and high reliability.

Product Selection of High Pressure Electric Actuated Ball Valve:

(1) Valve body parameters: nominal diameter, working pressure, process medium, application occasions, valve body materials and other series of parameters.
(2) Actuator parameters: power supply voltage, control type, control signal (4-20mA,1-5V), mode of action (electric-open, electric-off).